iPhone Camera Repair in Lahore

Camera problems we fix

• Blurry photos that never focus, or focus only on the ultra-wide lens: a failed autofocus or optical stabilisation module.
• Shaking, vibrating or buzzing camera with a rattling image in the viewfinder.
• Black screen in the Camera app, or the app closes when you switch to the rear or front camera.
• Cracked rear lens glass, even with the camera still working: dust and moisture will reach the sensor.
• Spots, haze or fog in photos from dust or moisture behind the lens.
• Front camera or Face ID issues together after a drop or a screen change: the front sensor flex.
• Flash not working or the torch greyed out: usually the flash on the rear camera flex.

Which part is faulty? Module, lens glass, flex or board

iPhone cameras fail in four distinct ways and the repair is different for each. The camera module (sensor plus lens plus stabiliser) fails after drops and shows as shaking, no focus or a black screen; it is replaced as a unit. Lens glass on the back cracks without harming the module; we replace the glass alone and clean the sensor. The front camera flex carries the selfie camera and, on Face ID phones, the Face ID components; a torn flex shows as a front camera error. Finally, a camera that has never worked since a water incident or shows a black screen on both cameras is usually a board-level power or connector fault. The free diagnosis tells you which it is before any price is discussed.

How much does iPhone camera repair cost in Lahore?

Lens glass replacement is the cheapest camera repair. Rear camera modules are priced by model and by how many lenses the module contains: a single-lens iPhone SE module costs far less than a triple-lens iPhone 16 Pro or 17 Pro module with 5x telephoto. Front camera flex replacements are priced by model. We fit original or OEM-grade modules and tell you which. Message us the model and the symptom on WhatsApp for an exact quote.

A note on newer iPhones and camera pairing

From the iPhone 12 onward, iOS pairs the rear camera module to the logic board. A module that is not paired through Apple’s system can show an “Unknown Part” notice in Settings and, on some models and iOS versions, may lose specific features until the pairing is completed. We explain the current behaviour for your exact model and iOS version before you decide, and we complete the pairing where the model allows it. Front cameras and lens glass are not affected by this.

How long does it take?

Lens glass and rear camera modules are usually done in 30–60 minutes while you wait. Front camera flex replacements, which involve removing the display and transferring Face ID components, take closer to an hour. Board-level camera faults take longer and are quoted after diagnosis.